12v 600W pure sine wave inverter with LED remote controller

$60.06

Item:NP 600

DC input voltage: 12V or 24V
AC output voltage:100V-120V or 220-240V
Rated power:600W
Surge power:1200W
USB output: DC 5V/2.1A
Optional function:LED digital display / Remote control
Special configuration: 5 meters LED remote controller (optional)
Remote controller CR-8 / CR-16A (optional)
Package List:
1 x 600 W Power Inverter
2 x set of red and black cables
1 x bag of in-line fuse
1 x User Manual

Description

Full sine waveform output,Input & Output fully isolation design for the maximum operation safety.
comprehensive status LED indicators
Input protection: polarity reversal (fuse), low pressure, overpressure protection
Output protection: short circuit, overload, over – temperature protection

The most prominent feature of NP series is that it has 3 times the surge power and energy saving mode, and it belongs to mid-high-end brands in the market. Craftsmanship and technology are the top of the current inverter market.
The energy-saving mode is shown as:
When the power is less than 15W, it can be adjusted by DIP switch.

It’s worth mentioning that the output frequency 50 / 60 Hz also can be selected by DIP switch.And fan cooling mode has been upgraded completely,through the intelligent cooling fan speed control determined by loads and temperature dual control.

The NK series inverter is suitable for what kind of appliances in your life?
The answer is obvious,NP seriesr has an instantaneous peak power value of 3 times,for electrical appliances with inductive load characteristicsor, it is the best combination.This type of inverter will soon become the mainstream in the inverter market

So what kind of appliances in your life are inductive loads?
More common,such as household refrigerators/microwave/air conditioners, outdoor electric motors/welders…

So how do I choose the right inverter to match my appliances?
Here’s a tip: even if you’re not a technical staff, you can also choose the right number of watts to match your electronics.
Every electrical product will have a corresponding specification when it comes out of the factory. Observe carefully and find out it surge power, as long as it does not exceed the surge power of the inverter, it can be used.

Parameter

MODELFS200-112FS2000-124FS2000-148FS2000-212FS2000-224FS2000-248
OutputAC Voltage100/110/120VAC220/230/240VAC
Rated Power2000W
Surge PowerLoad 120~150%(3min.);4000W(3sec.;resistive)
WaveformPure Sine Wave
USB port5V 2.1A5V 2.1A——5V 2.1A5V 2.1A——
InputDC Voltage12VDC24VDC48VDC12VDC24VDC48VDC
Voltage Range10.5~15VDC21~30VDC42~60VDC10.5~15VDC21~30VDC42~60VDC
Efficiency(Typ.)>90%
Remote ControlFunction(optional)
ProtectionBAT.Low Alarm10.5±0.5VDC21±1.0VDC42±2.0VDC10.5±0.5VDC21±1.0VDC42±2.0VDC
BAT.Low Shutdown10±0.5VDC20±1.0VDC40±2.0VDC10±0.5VDC20±1.0VDC40±2.0VDC
Over LoadShut down output voltage, restart to recover
Over Voltage15.5±0.5VDC31±1.0VDC62±2.0VDC15.5±0.5VDC31±1.0VDC62±2.0VDC
Over TemperatureShut down output voltage, recover automatically after temperature goes down
Output ShortShut down output voltage, restart to recover
DC Input Reverse PolarityBy fuse
Earth FaultShut off o/p when the load has electrical leakage
Soft StartYes, 3~5 Seconds

Inquiry

Fields with * are required.

Reviews

There are no reviews yet.

Be the first to review “12v 600W pure sine wave inverter with LED remote controller”

Your email address will not be published. Required fields are marked *